What is the installation process of lights? There are many kinds of lights and lanterns on the market. Different lights, lamps and lanterns have different installation methods. If you don't understand the installation process of lamps and lanterns, you don't know whether the quotation of the master is high or low when you ask the master to come and install them. Now let's share with you the installation process of lamps and lanterns.
How To Install Lights
Different lights have different installation methods.
1. Ceiling lamp: fixed base. When fixing the base, pay attention to the holes on the base. Pull the wire out of the hole and fix the base. If your new lamp is the same size as the existing lamp, you can use the original hole. Otherwise, you need to use an electric drill to drill again.
2. Spotlight: First connect the starter, strip the wires, then twist the two wires together and wrap them with insulating tape. If the starter is not removed, go to the next step directly. Then there is the connection between the starter and the spotlight. The same small clip can be fastened.
3. Integrated lamp: The most troublesome thing to install integrated lamp is to fix the lamp on the ceiling. The metal sheet is adhered to the keel in a circle, so be sure to align the iron sheet with the gap of the keel and insert it slowly. If it is not aligned, the lamp tube may fall off at any time, and there will be a large gap on the side of the lamp tube after installation, which can be seen at a glance.
What Are The Precautions For The Installation Of lighting
1. The most basic condition for the installation of lights is that they must be firm.
2. When installing wall lights, table lamps, floor lamps, mirror headlights and other lights in the room, if the height is less than 24 meters or less, the metal shell of the lamps should be grounded to ensure the safety of use.
3. In the process of installing bathroom and kitchen short leg lamp caps, porcelain screw mouth short leg lamp caps should be selected. The wiring and phase line of screw lamp cap shall be connected to the central contact port, and the zero line shall be connected to the threaded port.
4. For lamp caps including switches, such as desk lamps, in consideration of the safety of use, the head handle shall not have exposed metal parts.
5. When various lights are installed on the flat roof of decoration, they should be installed according to the installation instructions of lamps. When the weight of the lamp exceeds 3kg, the embedded hook or the support and hanger shall be directly fixed from the roof with expansion bolts (the lamp cannot be installed by hanging the keel support from the flat top). The wire connected from the lamp head box shall be protected to the lamp position with a hose to prevent the wire from being exposed in the flat roof.
6. Concealed conduits in suspended ceilings or wall panels must have flame retardant sleeves for maintenance.
